Saturday, Jan 20, 2018

Posts Tagged ‘Q9450’

Initial Overclocking of the Q9450

I’m not that experienced with overclocking and with the P5W and my E6600 I just used one of the default settings that got me over 3gHz and I was happy. With the Q9450 and the Maximus Formula I tried some settings for 445FSB and had some failures but I’m still in the learning process of all of the voltage settings. I was able to successfully get it up to 3.04gHz using 380 (as opposed to the default of 2.66gHz @ 333FSB) and keeping the auto settings for the voltage. I did testing with Prime95 on all 4 cores for about 20 minutes with no issues.

It looks like it should be able to reach around 445FSB with voltage adjustments and I’ll go for that this weekend.  I’m going to give the 380FSB / auto a test run in some games! :)

The Upgrade: Intel Q9450 & Asus Maximus Formula, Complete

I was happy that Intel hasn’t changed anything in their architecture for reading the RAID and the ICH7 built RAID was recognized on the new motherboard using ICH9. I also gave it a try of just booting into Windows but the drivers weren’t compatible so I did a “dirty” refresh of XP. I grabbed the ICH9 drivers and did an XP refresh install with the drivers, added the motherboard drivers and brought it up. So far it’s running very well without a complete rebuild. I’ve not oc’d it yet but Crossfire is working great and I ran a few rounds of flawless UT3. I’ve also had it running Folding@Home without issue the past 2 days.

I typically rebuild with new hardware but this one went so smooth (and I really don’t have the time to rebuilt right now and the build is about 2 months old) that I think I’m going to keep it for now. When I do a rebuild, I’ll probably (and I hate saying it) go to Vista 64 to fully utilize the 4gb of RAM among other things.

I do have to say that this was one of my easiest and most flawless upgrades. Typically there’s always some small stupid thing I miss, forget or there’s something hardware related causing issues. I dropped the chip on the board, added the ram, attached the Zalman 9700 (a dream to attach compared to the Tuniq Tower), plugged in connectors and it powered on. I finished up with the cards and was booted in no time.That’s not to say it didn’t come without irritation or scars. The biggest irritation is fitting video cards and cabling inside of cases these days and avoiding fans. Part of it could be my Apevia PSU, a part the Antec Nine Hundred’s layout and a final part how they are making motherboards these days. The motherboard is nice but I hate having the SATA connectors on the side of the board rather than on the surface. This is, for the most part, an enthusiast board but Asus makes some of the pieces more difficult for that same crowd that swaps hardware more often. Having a CMOS reset switch on the back is also nice. At least you can keep the case closed while doing OC testing.

I’ll toss some pictures up of the upgrade, more information and some analysis of performance and overclocking differences between this and the Intel E6600 and Asus P5W Deluxe tonight.

I also added the Intel NIC but not installed the other card in my server or started using the 3Com switch as of yet.  I needed more than a 4 port switch (I don’t need my wireless router/switch with the Uverse RG) and I wanted gigabit so I went with the 3COM 3CGSU08.  I’ll get those up tonight as well.

The Upgrade: Intel Q9450 & Asus Maximus Formula, Delay

I got the Zalman today but other things got in the way of doing the upgrade damn it! 😉 I hope to be up and running on the new system tomorrow night. I’m going to do some benchmarks and hopefully for the first time get something uploaded on here with the results. I had initially picked up the ZeroTherm based on the cooling and OC abilities but after seeing the fine print of how loud the fan was and that it also left metal fragments when screwing it in, I went with the Zalman 9700. While the reviews put it at the Zalman at the center of the pack, I’ve seen too many happy reviews about it and since the 9450 is 45nm it should do fine and it’s a bonus that it doesn’t throw metal fragments on the motherboard when installing.

We’ll see how the Q9450 and Formula compares to the E6600 & P5W later today. Until then….

The Upgrade: Intel Q9450 & Asus Maximus Formula

I picked up a Q9450 a while back when Micro Center had them for $300 and I finally added the Maximus Formula for the motherboard this week from NewEgg along with 2GB of Crucial Balistic 1066 RAM and a Zalman 9700 cooler.  I’m going to replace the Tuniq Tower 120 that’s currently on my E6600 with the Zalman.  While reviews put it center of the pack, I like it for a combination of cool and quiet.  I had picked up a Therm cooler that I will send back after seeing the abismal reviews of how loud it is.  It was placed at the top for overclocking but I also don’t want a buzz saw running constantly.  The Tuniq is loud enough and I’m hoping the 45nm chip can do well with the $62 Zalman and I can add a side fan to my Antec 900 case to help but I think the case is incredibly cool even with the 2 3870’s.

The build shall begin this weekend… Stay tuned…


Radio Vietnam

Winamp Playlist